icon
4.8 Stars
icon
From 1000+ Reviews
  • Servicing Brisbane and Melbourne Now
We're Open!

Blocked Sewer in Melbourne

  • $0 Call-Out Fee (Conditions apply)
  • Same-Day Service Available
  • money_round [#013d7b]Created with Sketch.
    Flexible Finance – Get Help Now, Pay Later (Humm & Zip Available)
  • 60-Minute Rapid Response for Emergencies
hero image

Melbourne Sewer Solutions


If you're experiencing issues with your sewer system, it’s important to act fast to avoid potential health hazards and costly damage to your property. General Home Services Melbourne offers expert blocked sewer services for both residential and commercial properties across Melbourne. Our experienced team uses advanced equipment to quickly identify the cause of your sewer blockage and provide efficient solutions.

With our professional services, we ensure your sewer system is flowing freely, reducing the risk of overflow, unpleasant odors, and other problems that can arise from a blocked sewer. We also offer emergency drain unclogging in Melbourne to resolve issues quickly and effectively.

Melbourne Sewer Solutions

Common Signs of a Blocked Sewer

A blocked sewer can lead to serious plumbing issues if not addressed promptly. Here are some common signs that may indicate a blockage in your sewer system:

  • Slow Draining or Gurgling Sounds
  • Foul Odors
  • Water Backing Up
  • Multiple Blocked Drains
  • Soggy or Wet Areas in the Yard

If you notice unusually wet or soggy patches in your yard, especially near sewer pipes, this could indicate that wastewater is backing up due to a blockage in your sewer line, leading to leaks or overflows.

Is It a Blocked Drain, Toilet or Sewer?

While a blocked drain in Melbourne may seem localised to a single sink, shower, or toilet, it can sometimes be a symptom of a wider problem in the sewer line. If multiple drains are affected or if the blockage causes water to back up, it's a clear sign that the problem is likely within the main sewer system.

If you’re experiencing a drainage issue, contact General Home Services Melbourne to get an inspection and find out the root cause of the problem.

Common Sewerage Problems in Melbourne

Sewerage issues can arise from various factors, leading to significant disruptions and potential damage to your property. In Melbourne, the most common sewerage problems typically include:

1. Tree Root Intrusion

Tree roots are a major cause of sewer blockages in Melbourne. Roots naturally seek moisture, and when they invade sewer lines, they can cause severe blockages, cracks, or even pipe bursts. Over time, these roots can grow into the pipes, obstructing water flow and leading to overflows and backup issues. Our tree root removal service in Melbourne can help restore normal flow and prevent further damage.

2. Fat, Grease, and Oil Build-Up

Many households and businesses in Melbourne unknowingly contribute to blockages by pouring fats, oils, and grease down the drain. These substances congeal and build up inside the pipes, eventually causing a complete blockage. The problem is often worse in commercial kitchens and food-processing facilities, where grease accumulates rapidly. Regular drain cleaning and mindful disposal of grease can help prevent these issues.

3. Foreign Objects in Sewer Lines

Items that should never be flushed down the toilet often end up in the sewer system. Wipes, sanitary products, cotton buds, and even toys can cause significant blockages when flushed, as they do not break down easily. These foreign objects can cause slow drainage, unpleasant odors, and even complete blockages. Proper waste disposal and Melbourne blocked toilet repairs are critical to avoid this common issue.

4. Collapsed or Broken Pipes

Sewer lines in Melbourne, particularly older ones, can suffer from wear and tear over time. Collapsed or cracked pipes due to shifting soil, ground movement, or tree root intrusion can disrupt the normal flow of wastewater, causing blockages and flooding. If your system is older or you’re noticing recurring issues, it may be time forpipe relining in Melbourne or a pipe replacement to restore proper function.

5. Improper Installation

In some cases, sewer problems stem from improper installation of the pipes. Incorrectly laid pipes can lead to issues such as misalignment or inadequate slope, which can result in poor drainage or backflow. If you suspect faulty installation, CCTV pipe inspections can provide a comprehensive look at the pipe system to identify any underlying issues.

6. Heavy Rain and Flooding

Heavy rain can overwhelm Melbourne’s sewerage systems, especially if they are already partially blocked. Stormwater drains may struggle to handle the excessive water, causing sewer systems to back up and overflow. Flooding can also wash debris into sewer lines, further complicating the problem. Keeping your stormwater and sewer systems well-maintained can help minimise the risk of this issue.

7. Sewer Vent Problems

Blocked sewer vents can cause pressure to build up inside the sewer lines, leading to gurgling sounds, slow draining, or foul odors. These vents allow air to escape from the plumbing system and help maintain proper pressure. If blocked, it can cause water to drain slowly and even result in a sewer backup. Regular maintenance checks can ensure these vents are clear and functioning properly.

By identifying the root cause of the blockage, our plumbers in Melbourne can provide targeted solutions to get your sewer system back in working order.

How Our  Sewer Clog Removals Work – The Process


Step 1: Initial Assessment and Inspection

The first step in any sewer repair is a thorough inspection. Our team will assess your sewer system using CCTV camera inspections, which allow us to see exactly where the blockage is and determine its cause. This non-invasive method helps us avoid unnecessary digging and disruption.

Step 2: Clearing the Blockage

Once we’ve identified the cause of the blockage, we will use one of several methods to clear the sewer line, including high-pressure water jetting or drain rodding. These methods are effective in breaking down debris, roots, and grease buildup to restore the flow.

Step 3: Repairing or Replacing Damaged Pipes

If the blockage is caused by damaged or broken pipes, we will perform the necessary repairs. In some cases, we may recommend Melbourne drain relining, a trenchless solution that involves repairing pipes from the inside, without the need for extensive digging.

Step 4: Final Inspection and Testing

After the blockage is cleared and repairs are made, we will perform a final inspection to ensure the sewer system is functioning properly. We’ll also test for any remaining issues to ensure everything is flowing smoothly.

Sewer Clog Removals

Less Interruption in Your Sewer Repairs

At General Home Services Melbourne, we utilise pipe freezing in Melbourne as a specialised technique for certain sewer repairs, offering a less disruptive alternative to traditional methods. When applicable, pipe freezing allows us to create temporary ice plugs within specific sections of your sewer line, isolating the area requiring attention. This technique is particularly useful for repairs that would otherwise necessitate a complete system shutdown or extensive excavation.

It's important to clarify that pipe freezing is not a solution for general sewer blockages caused by debris like tree roots or grease. While it can be used to isolate a section of pipe containing a blockage, enabling targeted repairs or section replacements, it does not directly remove the obstruction itself. For common blockages, we employ techniques such as high-pressure water jetting.

When appropriate, pipe freezing helps us to perform repairs with reduced downtime and minimises the impact on your property. This targeted approach can be more efficient and cost-effective than traditional methods in specific situations, but it is not a universal solution for all sewer problems. Our experienced plumbers will assess your situation to determine the most effective and appropriate repair strategy

Limitations of Pipe Freezing for Sewer Pipes:

  • Extremely large diameter pipes
  • Severely damaged pipes
  • Inaccessible pipe locations
  • Pipes with very high flow rate
  • Blocked sewers
sewer repair

Why We’re The Melbourne Sewer Blockage Experts


Experienced Professionals

Our team of skilled Melbourne plumbers have years of experience in handling blocked sewer issues. We use the latest tools and techniques to efficiently clear blockages and prevent future problems.

Emergency Services Available

Sewer blockages can be urgent, especially if they result in overflows or unpleasant odors. We offer emergency blocked sewer repair services to resolve issues as quickly as possible, 24/7.

Advanced Technology

We use advanced CCTV inspections to identify the exact location of the blockage, reducing the need for unnecessary excavation and ensuring a quicker, less disruptive process.

Long-Term Solutions

Whether it’s tree root removal, pipe repair, or complete sewer line replacement, we provide long-term solutions to prevent future blockages and ensure your sewer system remains in top condition.

Get Your Sewer System Flowing Again – Contact Us Today!

Blocked sewers are more than just an inconvenience – they can lead to costly damage and health hazards if not addressed promptly. General Home Services Melbourne offers expert blocked sewer repair services to ensure your sewer system is clear and functioning correctly. Whether you need an emergency repair or a long-term solution, our team is here to help.

Contact us today for professional and efficient sewer solutions!

Sewer System Flowing

Blocked Sewer Melbourne FAQs

1. How can I tell if my sewer is blocked?

Common signs of a blocked sewer include slow drains, gurgling sounds from your pipes, unpleasant smells, or water backing up in your sinks, showers, or toilets.

2. What causes sewer blockages?

Sewer blockages can be caused by tree roots, grease buildup, foreign objects, or damaged pipes. Regular maintenance and avoiding flushing inappropriate items can help prevent blockages.

3. Can you clear my sewer without digging?

Yes! We use advanced CCTV pipe inspections to locate the blockage, allowing us to clear it using non-invasive methods like high-pressure water jetting or drain rodding, without the need for digging.

4. How quickly can you clear a blocked sewer?

Most blockages can be cleared within a few hours, depending on the severity and location of the issue. We offer emergency services to ensure quick resolution of your sewer problems.

5. How do you repair broken sewer pipes?

If we discover a damaged pipe during our inspection, we can repair it using traditional methods or pipe relining, a trenchless technology that allows us to fix pipes without digging up your yard.

What Our Customers Say

Make your
Booking as Easy as 1,2,3

Have An Emergency? Contact Us Now1300 584 014

We accept flexible finance

Humm logoZip logo

*Conditions apply

Select Your Area

Select Your Service

Job Description

Fill In Your Personal Details